How to design Bio-fluorescence material scattering
The Bio-fluorescence describes the process by which light is absorbed within an object and then re-emitted a different wavelength. here
An extensive knowledge and experiences related with optical design, engineering, application notes, videos, technical tools, and other optical engineering resources are available here! Hope it will help you.
If you can’t find the info which you expect, you could go to the Shapeoptics Online Library, or email us: [email protected], we will guide you to find the knowledge and techniques you want.
The Bio-fluorescence describes the process by which light is absorbed within an object and then re-emitted a different wavelength. here
Microscope objective are essentially diffraction-limited optical devices. How to design it, and what’s the design tips? Here we will share
Measuring the depth of an object in 3D imaging- 3D metrology presents a unique set of challenges, how to handle
MTF data could reflect the optical system performance, and a proper optical testing lab setup is essential for obtaining reliable,
What is laser beam quality factor? How to evaluate laser beam quality? Why laser beam quality degrades during propagation? This
How to simulate laser – fibre coupling, how to setup and simulate the fiber optics propagation? This article demonstrates it!
How to predict the optical performance considering include diffraction, aberrations, distortion, etc, this article will share a bit of this
The optical image contrast performance is often specified by MTF at a given spatial frequency. How to optimize it, this
Optical Cold mirrors reflect visible light while allowing IR light pass through but not using it. Here we provide them
Convex-mirror reflects light off of the outer surface and bulges out towards the viewer, Shapeoptics offers a range of
LED flood light is designed for indoor and outdoor applications for replacement for traditional flood light, how to design it,
Ambient light can cause contamination of the image，how to solve its impact on an opto mechanical system, this article will
The most important purpose for the stray light analysis is to find the “source” caused the ghost Image and
It is often essential, prior to physical prototyping, to investigate the effects of stray light, how to observe it, this
From flash lenses in mobile phones to LED lighting solutions in automotives, LED lenses are applied everywhere, this article will
Neutral Density Filters are type of ND filters, which are used to control the light intensity by coated chromel layer
In biophotonics, we would like to show how light/power is absorbed, or demo the biophotonic reaction in an PCR tube,
How to design an optical system considering the key LCD optical Characteristics /factors? This article will share a bit about
Plano concave mirrors are used for focusing, collecting, and imaging with no chromatic aberration. They are suitable for a variety
Iterference bandpass filter is used to isolate and transmit a specified narrow wavelength and reflect all other incident wavelengths.
